Prefabricated Steel House

Prefabricated Steel House

Prefabricated Steel House

Prefabricated Steel House

This is by no means an thoroughgoing list of what’s available in the area of prefabricated homes and buildings. This article is to introduce you to the world prefab. If you’re in the industry, you’ll probably be cringing about now at the word “prefab”. But, the word is one that has become synonymous with homes and buildings that have been partly or fully assembled in a factory setting.

I for one am excited to see the latest versions of modern prefabs emerging globally. They’re well thought out, beautiful, and energy-efficient.

And to anyone who has any doubts about the quality of today’s prefab homes, I’d ask, would you rather buy a house whose parts have all been crafted outdoors uncovered to the elements — by hand. Or, would you rather buy a house reinforced in a factory setting to tight specs exceeding that of site-built homes. I say exceeding, because a normal site-built home doesn’t have to endure the rigors of transportation.

For your review, here are quick descriptions of 10 of the many categories of prefab homes available for exploring at – in no particular order:

1. Manufactured

Single-family residential dwellings consisting of one, two or more sectioned units and constructed to Federal HUD code. Zoning regulations and ordinances of the local Municipality or County power non permit use of mobile and manufactured homes in all areas of their jurisdiction.

2. Modular

Modular refers to a method of building a home, rather than a type of home. A modular home can be reinforced in a factory from a stock modular home plan or from a customized plan, to the state, local or regional codes of where the home will be set up. Modular homes have non typically experienced the zoning restrictions and judicial ordinances applicable to manufactured and mobile homes.

3. Panelized

Panelized homes ar factory-built homes in which panels — whole walls with windows, doors, wiring, and outside siding — are transported to the site and assembled. Panels ar made from insulating foam sandwiched between two layers of structural material. The panels ar jackanapes and power already be filled with insulation when they arrive on the site. The homes mustiness meet the state or local building codes of where they ar sited.

4. Steel-frame

Steel frame is an equivalent to conventional stick frame or post & beam home design where the structural lumber is replaced by steel studs and trusses or steel posts and beams. Light-Gauge Framing System features screw-together, galvanized stud-and-truss, grid-type construction system built on 4-foot center.Red-Iron Metal Post & Beam Systems features bolt-together, pre-engineered post-and-beam-type framing system that uses the red-iron steel “C” beams on 8-foot center. The prefabricated home reinforced with this method can be single-story, two-story, and even tri-level home.
Unlike conventional wood framed home that requires interior walls to support the roof, the higher strength-to-weight ratio of steel house allows to span greater distances with less material and fewer supports. The result is higher floor layout and interior design flexibility.

Unlike wood, steel won’t shrink, rot, warp, buckle, split, or be attacked by insects. This results in greater durability, lower long-term maintenance, higher energy efficiency and overall greater quality of this prefabricated home.

5. Precut

This family includes wood-framed factory-built houses or cabins where building materials are factory-cut to design specifications and transported to the site to be assembled. presents prefab building kits designed as wood-framed (also known as balloon-frame, 2 x 4, 2 x 6 or stick-built construction) as well as prefabricated home kit / cabin kit using post-frame method. The homes or cabins must meet local or state building codes of the area where they will be sited.

6. Cedar

According to Katahdin Cedar Log Homes, cedar is redolent to people, and problematic to insects: The duramen of northerly white cedar produces organic compounds called thujaplicins – which create that fresh, pleasant cedar aroma. But to insect pests, such as moths and termites, cedar just plain stinks. They’ll avoid cedar homes and instead search out inviting, tasty pine structures.

Cedar home kits include everything you need to build the home, itself. That is to say, the walls, the floor, the ceiling, the windows and doors. But your foundation, plumbing and electric system ar not usually included in a kit.

7. Timberframe

Timber framing is a particular type of post and beam construction in which a frame is created from solid wood timbers that are then connected by any one of the following wooden joints: mortise and tenon, dovetails, or scarfs secured with hardwood pegs. The frame is covered with any one of a number of enclosure systems. Normally the timbers remain exposed to the interior of the building.

Timber frame structures exhibit a strength and aesthetic quality non found in conventionally framed houses. The timbers are pre-cut, shaped, and ruined astatine the factory, then sent to the construction site, where they can be quickly assembled by a crew, routinely using cranes to lift the bents and beams into place. The use of quality wood, enhanced by cabinetmaking that compares with fine cabinet making, maximizes the strength of the timberframe structure. Joinery is the heart of the entire structure.

8. Log

Log homes provide their owners with a comforting and reposeful sense of ease and simplicity. The mass of logs produces heating and cooling benefits, and reduces noise transmission into and throughout the home. These are very attractive characteristics, but there are also challenges in construction and limitations in decorating. These aspects require special design considerations and have unusual maintenance requirements.
Basic Kits Are…

WALLS ONLY: The walls-only logarithm home package includes all the logs for the outside walls, including fasteners. Roof beams and staircases may be added.

STRUCTURAL SHELL: Shell This package includes everything that’s in the walls-only package, plus all components necessary to keep the weather out, such as outside doors, windows, and the roofing system.

THE COMPLETE PACKAGE: Complete packages also includes interior components required to finish log homes. Such items admit interior walls, stairs, closets, interior doors and trim.

9. Circular

The circle is the strongest geometric shape we recognize, and this factor likely influenced builders of circular homes for thousands of years. Prefabricated circular buildings have been reinforced as cabins, studios, homes, offices or community halls and convention centers.
Most of today’s prefabricated circular homes and cabins offered across the country use conventional wood-frame or post & beam construction method. These homes and cabins are ideally suited to take the full advantage of locations offering exciting panoramic views, and to incorporate factor of the surroundings into the home design.

10. Dome

Geodesic Dome is using triangular networks forming hexagons and pentagons and creating a free-span, spacious environment of spherically molded structure requiring no internal supports. This results in large flexibility for utilizing interior space to implement floor designs non limited by structural restrictions. Because of the structural strength of the shape, the domes have a far better record of withstanding tornados, hurricanes and earthquakes than cube-shaped structures of conventional homes.

MATERIAL COSTS: Geodesic domes provide the greatest amount of floor area with the least amount of surface area, reduction the measure of needed building material by as much as 30-50%.

ENERGY EFFICIENCY: As a result of the shape, the dome has approximately 30-50% less roof and wall area than cube-shaped home of equal floor space. This results in lesser area being uncovered to the elements, resulting in reduction in heating and cooling costs of dome molded structures. Also, the spherical shape of the dome facilitates natural air flow yielding more even temperatures maximising boilersuit interior temperature comfort.


As a result of complicated angles, the interior and outside finishing of the dome (after quick assembly of the prefabricated shell) is significantly more labor intensifier than finishing the conventional house. Also, the finishing work requires highly skilled or specialised tradesmen which power not be available astatine every location. These factors power present welcoming challenge for skilled handyman – homebuilder, but would create substantial cost outlay if the leased labor is considered.

Image Source:

This entry was posted in Prefabricated Steel House and tagged , , , , . Bookmark the permalink.

Comments are closed.